How to Cut a Cigar
A good cut gives a smooth draw and keeps the wrapper intact. Straight cut, V-cut or punch: when to use each and how.
Premium cigars come sealed at the head with a small cap. You cut it to open the draw. Cut too little and it’s tight; cut too much and the wrapper can unravel. The goal is to remove just the cap.
Straight cut (guillotine)
- Find the shoulder, where the rounded cap meets the straight body.
- Place the blade just above that line, about 1/16 of an inch from the end.
- Cut in one quick, firm motion. Hesitating crushes the leaf.
V-cut
A wedge-shaped notch through the cap. It opens a deep channel for a fuller draw on thick cigars and keeps the head from collapsing.
Punch
A small round hole in the cap. Neat and easy to carry on a keychain; best on medium to large ring gauges. Not suited to pointed heads.

Torpedoes and pointed heads
Cut a little of the tip with a straight cutter, test the draw, and cut a touch more if needed. The point is there to focus the smoke, so don’t take too much.
If it goes wrong
- Draw too tight: cut a hair more off, or gently roll the cigar between your fingers to loosen it.
- Wrapper unraveling: a dab of moisture can tack it down; next time cut less.
This guide is for adults 21 and older. Cigars are not a safe alternative to cigarettes. Questions? See our FAQ or call 754-356-5292.